Stage 1 Conversion Clutch Kit Flywheel for 03-08 Tiburon SE GT 2.7L Dohc

This Item Includes

• Brand new Heavy-Duty Solid Single Mass Flywheel
• Brand new Heavy-Duty Pull Type Pressure Plate Stage 1
• Brand new HD Full Woven Organic Clutch Disc Stage 1
• Brand new Hy-Temp Release Bearing
• Brand new Alignment Tool
• High Performance Grease Packet
• All Pressure plate and Flywheel Bolts

This Superior Quality Conversion Kit replaces the Original Dual Mass Flywheel present in some vehicles, which is notable for failing quite constantly and for having to be completely replaced every time you perform a clutch change. Our system replaces the Dual Mass Flywheel with a Single Mass Solid Flywheel which comes with many added Benefits : They can be resurfaced, and DMFs cannot so you don't have to buy a new flywheel everytime you change your clutch, making it a lot more cost effective; Also SMFs are designed to withstand frequent speed and gear changes; They do not break up when they fail; They run a lot cooler, lengthening your clutch life, Etc.

IMPORTANT: KEEP IN MIND THAT WITH THIS "PULL-TYPE" CLUTCH THE INSTALLATION OF THE RELEASE BEARING IS COMPLETELY DIFFERENT, IT MUST NOT BE INSTALLED DIRECTLY ONTO THE PRESSURE PLATE OR BOTH PARTS WILL BE PERMANENTLY DAMAGED. THE RELEASE BEARING MUST BE INSTALLED ONTO THE RELEASE FORK AND THE BEARING WILL THEN BE SET IN PLACE WHEN THE FORK IS ENGAGED.

Vehicle Application

• 2003 - 2008 Hyundai Tiburon SE; GT (2.7L DOHC 6cyl; 5 and 6 speed)